| |
One Architecture: Four Compatible Families
 |
Microchip's newest dsPIC® Digital Signal Controller (DSC) and PIC24 MCUs offer the performance
speed of 40 million instructions per second (MIPS), selfprogramming capabilities via Flash memory and industrial and extended temperature
ranges. |
What is a Digital Signal Controller?
The dsPIC Digital Signal Controller (DSC) is a 16-bit (data) modified Harvard RISC machine that combines the control advantages of a
high-performance 16-bit microcontroller with the high computation speed of a fully implemented DSP to produce a tightly coupled single-chip,
single-instruction-stream solution for embedded systems design. Microchip's dsPIC DSCs are offered in two families – the dsPIC30F and
dsPIC33F. The dsPIC30F may be preferable for applications that favor any of the following attributes:
- Wide operating voltage range (2.5V to 5.5V)
- 5V operation to maximize analog noise immunity or to minimize voltage translation logic
- Lowest power consumption in the Power-down mode of operation
- Integrated, high-endurance on-chip EEPROM
The 3.3V dsPIC33F DSC family may be preferable for applications that favor any of these attributes:
- Large memory configurations (Flash and/or RAM)
- Low operating power consumption
- Maximum performance (40 MIPS)
- Lowest cost for larger memory configurations
Great things are happening with our new 16-bit PIC® microcontrollers!
With twenty one devices in its portfolio, Microchip features two 16-bit PIC microcontroller families - cost effective PIC24F MCUs and high
performance PIC24H MCUs.
Key features of the 16-bit PIC24F and PIC24H families include:
CPU
- Up to 16 MIPS performance (PIC24F) and up 40 MIPS performance (PIC24H)
- 17 x 17 hardware multiply, single-cycle execution
- 32-bit x 16-bit hardware divider
- C compiler-optimized instruction set
System
- Internal oscillator support: 31kHz to 8MHz, up to 32MHz with 4X PLL
- On-chip LDO voltage regulator
- JTAG boundary scan and Flash memory program support
- Fail-Safe Clock Monitor allows safe shutdown if clock fails
- Watchdog Timer with separate RC oscillator
nanoWatt Technology Power-Managed Modes
- Run, Idle and Sleep modes
- Multiple, switchable clock modes for optimum performance and power management
Analog Features
- 10-bit ADC, 16 channels, 500k samples per-second
- Two analog comparators
Peripherals
- Two UART modules with LIN and IrDA® protocol support, 4-deep FIFO
- Two SPI modules
- Two I2C™ modules with Master and Slave modes
- Cyclic Redundancy Check (CRC) module
- Five 16-bit timer modules
- Up to 5 input capture and 5 output compare/PWM
- Hardware Real-Time Clock Calendar (RTCC) with alarms
- Parallel Master Port (PMP) with 16 address lines and 8/16-bit data
- Up to 8 channels of Direct Memory Access (DMA) with zero overhead on CPU
- Correct ICC™ to 12C™
All dsPIC DSCs and PIC24 MCUs use the same MPLAB® Integrated Development Environment shared by Microchip's PIC® microcontroller
family. Additionally, the dsPIC30F is supported by Microchip's high-performance development systems, including: MPLAB C30 C-Compiler,
MPLAB SIM Software Simulator, MPLAB ICD 2 In-Circuit Debugger and MPLAB VDI Visual Device Initializer.
Looking for a High-Performance PWM for Motor-Control, Lighting and Power-Conversion Applications?
The dsPIC30F6015 DSC features an advanced Pulse-Width Modulation (PWM) peripheral designed for power conversion, motor control
and lighting applications, and is offered in a 64-pin TQFP package. It is ideal for applications that drive power FETs and require advanced
algorithmic processing.
The dsPIC30F6015 is part of Microchip's Motor Control and Power Conversion portfolio and was developed for customers who want a
software and pin-compatible memory expansion from the dsPIC30F5015 DSC. This new device incorporates Microchip's Enhanced Flash
self-programming capability, which permits a remote upgrade to the Flash program memory, allowing code revisions in end users'
applications. Additional key features include:
- 144 Kbytes of Flash program memory, which can withstand typically 100,000 erase/write cycles and has 40-plus years of data
retention over a wide operating voltage and temperature range
- 8 Kbytes of SRAM
- 4 Kbytes of high-endurance EEPROM (1 million erase/write cycles typical)
- 8 output PWM, complementary or independent modes, 4 duty-cycle generators, programmable dead time
- 10-bit A/D converter with up to 16 signal channels, 1 MSPS, 4 sample and holds for simultaneous sampling and trigger option
from advanced PWM
- Quadrature Encoder Interface
- Five 16-bit timers
- Eight standard PWMs
- Two of each: CAN, SPI and UART peripherals
- One I2C™ peripheral
With over 70 announced 16-bit products and more on the way, you can select from two 16-bit PIC24 microcontroller families and
two 16-bit dsPIC DSC families that offer compatible options across a wide spectrum of price, performance and feature sets. Common
to all of Microchip's 16-bit MCU and DSC families are: pinout compatibility, software compatibility, peripheral compatibility and common
development tools - helping to minimize development time, while retaining an optimal product selection for the application.
PIC24F Real-Time Clock and Calendar (RTCC)
If you are a current PIC18 or PIC16 user and need to step up in performance, memory, or peripherals, the PIC24F family provides an
easy upgrade path. The PIC24F family adds the RTCC peripheral to provide an accurate calendar with minimal software overhead for
a wide range of applications, such as security systems, meters and instrumentation, and hand-held terminals.
| Key Module Features |
- Time: Hours, minutes and seconds
- 24-hour format (military time)
- Calendar: Weekday, date, month and year
- Year Range: 2000 to 2099
- Leap year correction
- Configurable alarm
- Requires external 32.768kHz clock crystal
- BCD format for compact firmware
- Optimized for low-power operation
- User calibration with auto-adjust
- Calibration Range: ±2.64 seconds error per month
|
|
|
A valuable feature of the module is the ability to calibrate the RTCC for system parameters, such as temperature variation of the
32kHz crystal. This calibration feature can achieve errors of less than 3 seconds per month.
MPLAB ICD 2
Microchip's MPLAB® ICD 2 is a low cost, real-time debugger and programmer for selected PIC® microcontrollers and dsPIC®
digital signal controllers. Programs can be downloaded, executed in real time and examined in detail with the debug functions of MPLAB.
Set watch variables and breakpoints from symbolic labels in C or assembly source code, and single step through C source lines or into
assembly code. MPLAB ICD 2 can also be used as a development programmer for supported microcontrollers.
The secret behind in-circuit debugging is two dedicated hardware lines (microcontroller pins used only during debugging mode) that
control In-Circuit Serial Programming™ (ICSP™) of the device and afterwards, debugging through proprietary, on-chip
firmware. The MPLAB ICD 2 debug features are built into the microcontroller and activated by programming the debug code into the
target processor.
| Features |
- USB (Full Speed 2 M bits/s) and RS-232 interface to host PC
- Real time background debugging
- MPLAB IDE GUI (free copy included)
- Built in over-voltage/short circuit monitor
- Firmware upgradeable from PC
- Totally enclosed
- Supports low voltage to 2.0 volts. (2.0 to 6.0 range)
- Diagnostic LEDs (Power, Busy, Error)
- Reading/Writing memory space and EEDATA areas of target microcontroller
- Programs configuration bits
- Erase of program memory space with verification
- Peripheral freeze-on-halt stops timers at breakpoints
|
|
 |
The MPLAB ICD 2 connects using USB or RS-232 between the design engineer's PC operating with Microchip's MPLAB IDE Integrated
Development Environment and a product board (target) being developed. It acts as an intelligent interface/translator between the two,
allowing the engineer to look into the active target board's microcontroller, viewing variables and registers at breakpoints with MPLAB
IDE watch windows. A breakpoint can be set to halt the program at a specific location. The program can be single-stepped or run at full
speed. At breakpoints, data and program memory can be read and modified. Additionally, the MPLAB ICD 2 can be used to program or
reprogram the Flash-based microcontroller while installed on the board.
MPLAB® REAL ICE™ In-circuit Emulation System
MPLAB REAL ICE In-circuit Emulation System is Microchip's next-generation emulation and debugging system. Initially supporting the
dsPIC30F601XA, dsPIC33F, PIC24H and PIC24F 16-bit devices, this in-circuit emulation system provides a powerful in-circuit emulation
platform for easy and rapid application development and debugging. The emulation is performed using special hardware logic on the
target device itself, eliminating the need for a separate emulator device as well as precluding the possibility of the emulator differing
from the target device in functionality. The REAL ICE system supports full-speed emulation, communicating with the target device through
a traditional In-Circuit Serial Programming™ (ICSP™) interface (default) or a high-speed, low-voltage differential signaling connection
(for high noise immunity with longer cable lengths, especially for in-system emulation). Communication with MPLAB IDE on the host
workstation is handled through a high-speed USB 2.0 interface.
The MPLAB REAL ICE system provides substantial emulation and debugging features on a low-cost and non-intrusive platform. Up
to 6 hardware breakpoints and 1000 software breakpoints are supported, depending on the target device. Advanced, device dependant
breakpoint features are also included, such as break on address or data match, break on data read or data write, pass counter and
freezing peripherals during breaks. In addition, the MPLAB REAL ICE system allows user-configurable tracing of program memory and
logging of data memory variables and registers, easily controlled and monitored in real-time via MPLAB IDE.
With extensive over-voltage and over-current protections, rugged probe interface buffers and optically isolated power circuitry, the
MPLAB REAL ICE hardware provides a high degree of robustness, making it an ideal emulation platform for use in embedded control
applications.
| Features |
Key features of the MPLAB REAL ICE system include:
- Full speed emulation on target device itself - no separate emulator device needed
- Robust electrical design for safe, low-cost in-circuit emulation
- High Speed USB 2.0 PC interface
- Multiple target connections: traditional ICSP interface or LVDS (add-on option)
- Run, Halt and Single-step modes
- 6 hardware breakpoints and other advanced breakpoint features depending on the device
- 1000 software breakpoints (depending on the device)
- Instrumented (user-controlled) Program Memory Trace and Data Memory Log, with run-time updates in MPLAB IDE
- Stopwatch cycle counter
- Logic probe
- In-Circuit Serial Programming and read of on-chip Flash memory
|
|
|
Explorer 16 Development Board
The Explorer 16 Development Board is a low cost tool to evaluate the features and performance of Microchip's new PIC24 microcontroller
and dsPIC33 digital signal controller families. Coupled with the MPLAB® ICD 2 In Circuit Debugger, real-time emulation and debug
facilities speed evaluation and prototyping of application circuitry. The Explorer 16 Development Board features two interchangeable Plug-In
Modules (PIMs), one each for the PIC24FJ128GA010 and the dsPIC33FJ256GP710.
| Features |
- Includes both PIC24FJ128GA010 microcontroller and dsPIC33FJ256GP710 digital signal controller PIMs
- Alpha-numeric 16 x 2 LCD display
- Interfaces to MPLAB ICD 2, USB, and RS-232
- Includes Microchip's TC1047A high accuracy, analog output temperature sensor
- Expansion connector to access full devices pin-out and bread board prototyping area
- PICTail™ Plus connector for future expansion boards
- Full documentation CD includes user's guide, schematics and PWB layout
|
|
|
Featured Products
| Part Number |
|
Description |
Data
Sheet |
App.
Notes |
|
| DM240001 |
|
Explorer 16 Development Board
|
|
|
|
| DSPIC30F2010-20I/MMG |
|
28-Pin dsPIC30F2010 Enhanced Flash 16-Bit Digital Signal Controller
|
|
|
|
| DSPIC30F2010-20I/SOG |
|
28-Pin dsPIC30F2010 Enhanced Flash 16-Bit Digital Signal Controller
|
|
|
|
| DSPIC30F2010-20I/SPG |
|
28-Pin dsPIC30F2010 Enhanced Flash 16-Bit Digital Signal Controller
|
|
|
|
| DSPIC30F2010-30I/MMG |
|
28-Pin dsPIC30F2010 Enhanced Flash 16-Bit Digital Signal Controller
|
|
|
|
| DSPIC30F2010-30I/SPG |
|
28-Pin dsPIC30F2010 Enhanced Flash 16-Bit Digital Signal Controller
|
|
|
|
| DSPIC30F2011-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F2011-20I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F2011-20I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F2011-30I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F2011-30I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F2012-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F2012-20I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F2012-20I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F2012-30I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F2012-30I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3010-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3010-20I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3010-20I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3010-30I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3010-30I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3010-30I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3011-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3011-20I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3011-30I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3011-30I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3011-30I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3012-20E/P |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3012-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3012-20I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3012-20I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3012-30I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3012-30I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3013-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3013-20I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3013-30I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3013-30I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3013-30I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3014-20I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3014-20I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F3014-30I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3014-30I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F3014-30I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4011-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F4011-20I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F4011-30I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4011-30I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4011-30I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4012-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F4012-20I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F4012-30I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4012-30I/SO |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4012-30I/SP |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4013-20I/ML |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F4013-20I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F4013-20I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F4013-30I/P |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4013-30I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F4013T-20E/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F5011-30I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F5013-30I/PT |
|
High-Performance, 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6010-30I/PF |
|
Enhanced Flash 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6010A-20I/PT |
|
Enhanced Flash 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6010A-30I/PT |
|
Enhanced Flash 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6011A-20I/PT |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6011A-30I/PT |
|
High-Performance Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6012-20I/PF |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6012-30I/PF |
|
High-Performance Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6012A-20I/PT |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6012A-30I/PT |
|
High-Performance Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6013-20E/PF |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6013-20I/PF |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6013-30I/PF |
|
High-Performance Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6013A-20I/PT |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6013A-30I/PT |
|
High-Performance Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6014-20I/PF |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6014A-20I/PT |
|
High-Performance Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6014A-30I/PF |
|
High-Performance Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6014A-30I/PT |
|
High-Performance Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC30F6015-20E/PT |
|
Enhanced Flash 16-Bit Digital Signal Controller, 20 MIPS
|
|
|
|
| DSPIC30F6015-30I/PT |
|
Enhanced Flash 16-Bit Digital Signal Controller, 30 MIPS
|
|
|
|
| DSPIC33FJ128GP310-I/PT |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ128GP706-I/PT |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| DSPIC33FJ128GP708-I/PT |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 80 Pin Package
|
|
|
|
| DSPIC33FJ128GP710-I/PF |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ128MC506-I/PT |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| DSPIC33FJ128MC708-I/PT |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 80 Pin Package
|
|
|
|
| DSPIC33FJ128MC710-I/PF |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ128MC710-I/PT |
|
16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ256GP506-I/PT |
|
16-Bit Microcontroller, 256 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| DSPIC33FJ256GP710-I/PF |
|
16-Bit Microcontroller, 256 KB Flash Memory, 30 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ256GP710-I/PT |
|
16-Bit Microcontroller, 256 KB Flash Memory, 30 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ256MC710-I/PF |
|
16-Bit Microcontroller, 256 KB Flash Memory, 30 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ256MC710-I/PT |
|
16-Bit Microcontroller, 256 KB Flash Memory, 30 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ64GP706-I/PT |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| DSPIC33FJ64GP708-I/PT |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 80 Pin Package
|
|
|
|
| DSPIC33FJ64GP710-I/PF |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ64GP710-I/PT |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ64MC506-I/PT |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| DSPIC33FJ64MC508-I/PT |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 80 Pin Package
|
|
|
|
| DSPIC33FJ64MC706-I/PT |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| DSPIC33FJ64MC710-I/PF |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DSPIC33FJ64MC710-I/PT |
|
16-Bit Microcontroller, 64 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| DV164005 |
|
MPLAB ICD 2
|
|
|
|
| DV244005 |
|
MPLAB® REAL ICE
|
|
|
|
| PIC24FJ128GA006-I/PT |
|
PIC24 16-Bit Microcontroller, 128 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 64 Pin Package
|
|
|
|
| PIC24FJ128GA008-I/PT |
|
PIC24 16-Bit Microcontroller, 128 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 80 Pin Package
|
|
|
|
| PIC24FJ128GA010-I/PT |
|
PIC24 16-Bit Microcontroller, 128 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 100 Pin Package
|
|
|
|
| PIC24FJ64GA006-I/PT |
|
PIC24 16-Bit Microcontroller, 64 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 64 Pin Package
|
|
|
|
| PIC24FJ64GA008-I/PT |
|
PIC24 16-Bit Microcontroller, 64 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 80 Pin Package
|
|
|
|
| PIC24FJ64GA010-I/PF |
|
PIC24 16-Bit Microcontroller, 64 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 100 Pin Package
|
|
|
|
| PIC24FJ96GA006-I/PT |
|
PIC24 16-Bit Microcontroller, 96 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 64 Pin Package
|
|
|
|
| PIC24FJ96GA008-I/PT |
|
PIC24 16-Bit Microcontroller, 96 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 80 Pin Package
|
|
|
|
| PIC24FJ96GA010-I/PF |
|
PIC24 16-Bit Microcontroller, 96 KB Flash Memory, 8 KB RAM, and Advanced Peripherals, 100 Pin Package
|
|
|
|
| PIC24HJ128GP206-I/PT |
|
PIC24H 16-Bit Microcontroller, 128 KB Flash Memory, 8 KB RAM, 64 Pin Package
|
|
|
|
| PIC24HJ128GP210-I/PT |
|
PIC24H 16-Bit Microcontroller, 128 KB Flash Memory, 8 KB RAM, 100 Pin Package
|
|
|
|
| PIC24HJ128GP306-I/PT |
|
PIC24H 16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| PIC24HJ128GP310-I/PT |
|
PIC24H 16-Bit Microcontroller, 128 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| PIC24HJ128GP506-I/PT |
|
PIC24H 16-Bit Microcontroller, 128 KB Flash Memory, 8 KB RAM, 64 Pin Package
|
|
|
|
| PIC24HJ256GP206-I/PT |
|
PIC24H 16-Bit Microcontroller, 256 KB Flash Memory, 16 KB RAM, 64 Pin Package
|
|
|
|
| PIC24HJ256GP210-I/PT |
|
PIC24H 16-Bit Microcontroller, 256 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| PIC24HJ256GP610-I/PF |
|
PIC24H 16-Bit Microcontroller, 256 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| PIC24HJ256GP610-I/PT |
|
PIC24H 16-Bit Microcontroller, 256 KB Flash Memory, 16 KB RAM, 100 Pin Package
|
|
|
|
| PIC24HJ64GP206-I/PT |
|
PIC24H 16-Bit Microcontroller, 64 KB Flash Memory, 8 KB RAM, 64 Pin Package
|
|
|
|
| PIC24HJ64GP506-I/PT |
|
PIC24H 16-Bit Microcontroller, 64 KB Flash Memory, 8 KB RAM, 64 Pin Package
|
|
|
|
 refers to New Product Introduction
|
|
Previous Page
Previous Page