3.3V/5V High Speed CMOS Optocoupler

Page Contents:   [ Featured Products | Datasheets | Application Notes | Buy Now ]

Available in either an 8-pin DIP or SO-8 style respectively, the ACPL-772L or ACPL-072L optocouplers utilize the latest CMOS IC technology to achieve outstanding speed performance of minimum 25MBd data rate and 6ns maximum pulse width distortion.

Basic building blocks of this family of products are a CMOS LED driver IC, a high speed LED and a CMOS detector IC. A CMOS logic input signal controls the LED driver IC, which supplies current to the LED. The detector IC incorporates an integrated photodiode, a high speed transimpedance amplifier and a voltage comparator with an output driver.

ACPL-072L is the fastest (25MBd) 3.3V optocoupler in the industry with both 3.3V and 5V power supply compatibility. It is built with an internal level shifter that automatically senses the power supply rating and allows different supply voltages at both input and output. It supports a wide temperature range of -40°C to +105°C with excellent speed performance of maximum 6ns pulse width distortion (PWD), maximum 40ns propagation delay. It is built with a buffer that accepts voltage input and transmits voltage output that is compatible with CMOS/TTL logic. It is certificated with reinforced insulation with minimum 3.75kV isolation voltage protection.

Avago’s ACPL-772L is the industry’s fastest, dual supply voltage (3.3V and 5V) optocoupler in a DIP-8 package. It operates at a minimum speed of 25Mbd at a wide temperature range of -40°C to +105°C, provides creepage and clearance of greater than 7mm and offers a low pulse width distortion of 6ns maximum that helps to maintain high data integrity over longer distances. The device exhibits a high common mode rejection of 10kV/ms minimum, with 40ns maximum propagation delay and 20ns maximum propagation delay skew.

 

FEATURES Dual voltage operation (3.3V and 5V) Allows level shifting functionality Supports high speed data rate of 25MBd Wide temperature operation CMOS output and buffer input Compatible with CMOS and TTL logic level Lower power consumption with 3.3V supply Good AC performance with lower pulse width distortion

APPLICATIONS Digital Fieldbus Isolation: CC-Link, DeviceNet, Profibus, SDS Multiplexed data transmission General instrument and data acquisition Computer peripheral interface Microprocessor system interface

 

 

 

Features	Advantages	Benefits
+3.3V and +5V Compatibility	Build-in internal level shifter that accepts different supply voltages at both input and output	Eliminates the need for additional power supply
CMOS/TTL input, CMOS output	Voltage logic driven and easy to design	Eliminate the need of external limiting and pull-up resistors
High data rate: 25 MBd maximum 6ns PWD maximum 40 ns prop. delay maximum 20 ns prop. delay skew maximum	Good speed performance that meets profibus and DeviceNet Standard	The fastest 3.3-V optocoupler in the market with low percentage pulse width distortion (PWD/Pulse_Width) of 15%
- 40ºC to +105ºC	Wide temperature operation	Wide temperature operation
10-kV/ms (min) at VCM=1000 V	Able to reject high transient noise	To preserve data integrity
SO-8	Small footprint	Save board space
Pending safety and regulatory approvals UL1577, 3750 Vrms/1 min CSA component acceptance notice #5 IEC/EN/DIN EN 60747-5-2, Viorm=560 Vpeak for option 060	Certified of both reinforced insulation with failsafe mode and 3.75kVrms high isolation voltage	Reinforced insulation provides protection from electric shock and also failsafe design with user’s accessibility. Failsafe mode: a mode of system termination that automatically leaves system processes and components in a secure state when a failure occurs or is detected in the system.

 

 

Avago Vs. Competition:

	Sharp PC912	NEC PS9661	Avago Technologies ACPL-772L/072L
Channel	Single	Single	Single
Package	DIP8	DIP	DIP8/SO8
Operating Temperature	-40ºC - +85 °C	-40ºC - +85 °C	-40ºC - +105 °C
Isolation Voltage Vrms/1min	5000V	3750V	5000V/3750V
Recommended Vdd	5V	5V	3.3V/5V
Max Input Supply Current IDD1	10mA	10mA	15mA
Max Output Supply Current IDD2	9mA	9mA	10mA
Prop. Delay tPHL Max.	40ns	40ns	40ns
Prop. Delay tPLH Max.	40ns	40ns	40ns
Pulse Width Distortion PWD Max.	6ns	8ns	6ns
Prop. Delay Skew tPSK Max.	20ns	20ns	20ns
Data Rate Max.	25MBd	25MBd	25MBd

 

 

 

 

 Featured Products

Part Number		Description	Data Sheet	App. Notes
ACPL-072L-000E		3.3V/5V, 25MBd, -40ºC to +105ºC High Speed CMOS Optocoupler with Reinforced Insulation
ACPL-772L-000E		25MBd 3.3V Digital CMOS Optocoupler

refers to New Product Introduction