Previous Page   Next Page

 

High Frequency Boost Converters for LED Applications


Page Contents:   [ Featured Products | Datasheets | Application Notes | Buy Now ]



Using the latest CMOS design technology and available in very small packages, the AME5130/31/38 and AME5140/42 products are dedicated for the drive of white LEDs but also applicable in portable equipment.


There are alternative technologies used to give the customer the opportunity of the best choice stepup DC-to-DC converters for constant current.

The AME5142 is a fully integrated white LED boost converter that drives up to six white LEDs in series to simplify and miniaturize color LCD display illumination used in digital cameras, cell phones and PDAs.

A series configured array of white LEDs is currently considered the most effective backlighting solution for the design of color LCD displays because this architecture achieves ideal current matching of the LEDs to provide uniform lighting.

The device operates as a DC-to-DC boost converter that regulates the current through the LED string. Dimming is accomplished by applying a pulse width modulated signal (PWM) to change the average output current.

The AME5140 is a switching regulator using the current mode boost converter technology with a fixed 1.6 MHz switching frequency. Highest power density is achieved with the use of a very small inductor and capacitor and is possible due to the minimal power loss of the internal 1.6A switch.

The AME5138 is a fixed off-time step-up DC-to-DC converter ideal for LCD panels requiring low current and high efficiency. The low 400ns off-time allows the use of tiny external components.

The AME5130 fixed off-time step-up DC-to-DC converter can drive up to 8 white LEDs from a single Li-Ion battery.

The AME5131 high frequency boost converter is dedicated for LCD bias supply. It can also be used in white LED applications for backlighting.

Standard 3.3V / 5V to 12V power conversions are applications benefiting from the low voltage output ripple. A very low quiescent current and optimized control scheme allow operation with high efficiency and long battery life time.

 

FEATURES
  • 1.8 to 5.5V input range
  • Very small packages (SOT25-DFN)
  • Wide temperature range -40° to 85°C
APPLICATIONS
  • White LED backlighting
  • Portable applications
  • White LED current source
  • LCD bias power
  • Standard 3.3V/5V to 12V conversions

 


 

 

 

 Featured Products
Part Number   Description Data
Sheet
App.
Notes
 
AME5130AEEVADJZ   Micropower Step-up DC-to-DC Converter View PDF   Buy Now
AME5131AEEVADJZ   Low Power DC-to-DC Boost Converter View PDF   Buy Now
AME5138AEEVADJZ   Micropower Step-up DC-to-DC Converter View PDF   Buy Now
AME5140AEEVADJY   1.6MHz Boost Converter with 30V Internal FET Switch View PDF   Buy Now
AME5140AEEVADJZ   1.6MHz Boost Converter with 30V Internal FET Switch View PDF   Buy Now
AME5140AEVAADJZ-3   1.6MHz Boost Converter with 30V Internal FET Switch View PDF   Buy Now
AME5140BEQAADJZ   1.6MHz Boost Converter with 30V Internal FET Switch View PDF    
AME5142AEEVADJY   White LED Boost Converter in a Tiny Package View PDF   Buy Now
AME5142AEEYADJY   White LED Boost Converter in a Tiny Package View PDF   Buy Now

refers to New Product Introduction

 

Previous Page
Terms of Use  |  Privacy Policy
© 2009 Future Electronics. All rights reserved.

Next Page